TM 9-2320-289-34
10-4.
WINDSHIELD AND M1009 TOP ASSEMBLY SIDE WINDOW REPLACEMENT.
This task covers:
a. Removal
c.
Installation
b. Inspection
INITIAL SETUP:
Equipment Condition
l Windshield wiper arms removed (if removing
windshield). (See TM 9-2320-289-20)
Tools/Test Equipment
l Installing tool, J-26471
Manual References
l FM 43-2
Materials/Parts
• One inside rearview mirror support
• Loctite adhesive (Item 5, Appendix B)
l Denatured alcohol (Item 6, Appendix B)
l Abrasive cloth (Item 17, Appendix B)
l Masking tape (Item 68, Appendix B)
Personnel Required
l MOS 63W (2)
General Safety Instructions
l Wear heavy gloves and safety goggles
when handling glass.
l Alcohol used in this procedure is highly
flammable and poisonous.
a .
REMOVAL
WARNING
Wear heavy gloves and safety goggles when handling windshield (3) or
window glass to avoid risk of injury to personnel.
NOTE
l If removing windshield (3), perform steps 1-3.
l If removing M1009 top assembly side window (5), perform steps 2
and 3.
1.
Remove inside rearview mirror (7).
2.
Using tape, mark location on cab of cap (8) at bottom center of reveal molding (1). Remove
cap and remove reveal molding.
10-10
