TM 9-2320-289-34
10-4.
WINDSHIELD AND M1009 TOP ASSEMBLY SIDE WINDOW REPLACEMENT.
This task covers:
a. Removal
c. Installation
b. Inspection
INITIAL SETUP:
Equipment Condition
Materials/Parts
l Windshield wiper arms removed (if removing
l one inside rearview mirror support
windshield). (See TM 9-2320-289-20)
l Loctite adhesive (Item 5, Appendix B)
l Denatured alcohol (Item 6, Appendix B)
l Abrasive cloth (Item 17, Appendix B)
l Masking tape (Item 68,
Too/s/Test Equipment
Personnel Required
l Installing tool, J-26471
l MOS 63W (2)
Manual References
General Safety Instructions
l FM 43-2
l Wear heavy gloves and
when handling glass,
Appendix B)
safety goggles
l Alcohol used in this procedure is highly
flammable and poisonous,
a. REMOVAL
WARNING
Wear heavy gloves and safety goggles when handling windshield (3) or
window glass to avoid risk of injury to personnel.
NOTE
l If removing windshield (3), perform steps 1-3.
l If removing M1009 top assembly side window (5), perform steps 2 and 3.
1.
Remove inside rearview mirror (7),
2.
Using tape, mark location on cab of cap (8) at bottom center of reveal molding (1). Remove cap
and remove reveal molding.
10-10
