TM 9-2320-289-34
10-4.
WINDSHIELD AND M1009 TOP ASSEMBLY SIDE WINDOW REPLACEMENT
(Con’t).
b.
INSPECTION
CAUTION
In event of a stress crack or leakage, ensure that weatherstrip (2) and
flange (4) are thoroughly inspected before installing windshield (3).
Failure to follow this caution may result in recurrence of crack or leakage.
NOTE
If sheet metal and paint repairs are needed, see FM 43-2.
1.
Inspect flange for high spots or other irregularities, Remove all high
before proceeding.
2 .
Inspect weatherstrip for damage. Replace weatherstrip if damaged,
spots or irregularities
3 .
Inspect replacement windshield to ensure that there are no chipped edges or other
irregularities. Obtain another windshield if repairs cannot be made.
c.
INSTALLATION
WARNING
Wear heavy gloves and safety goggles when
window glass to avoid risk of injury.
l If installing windshield
l If installing M1009 top
NOTE
handling windshield (3) or
(3), perform steps 1-9.
assembly side window (5), perform steps 1-3.
1 .
Install weatherstrip (2) to windshield
(3) or side window (5).
2 .
Position windshield (3) or side window
(5) with weatherstrip” (2) at opening.
Install weatherstrip to flange (4) along
bottom edge of opening.
Work
remaining edges of weatherstrip into
flange.
10-12
