TM 9-2320-289-34
8 - 2.
STEERING COLUMN MAINTENANCE.
This task covers:
a. Removal
c. Assembly
b. Disassembly
d. Installation
INITIAL SETUP:
Equipment Condition
Materials/Parts
l Directional signal switch removed.
l One floor pan seal
(See paragraph 4-1 4)
l Grease (Item 36, Appendix B)
l Ignition switch removed.
(See paragraph 4-1 3)
Tools/Test Equipment
l Torque wrench
a.
REMOVAL
1 .
Place lock cylinder (2) in “RUN”
position. Remove retaining screw (3)
and lock cylinder from housing (1).
2.
Disconnect transmission control linkage from steering column shift tube levers. (See
paragraph 5-2)
3 .
Remove 2 nuts (6) and washers (5) securing flanged end of steering shaft to flexible coupling
(4) .
TA50471
8-2
