TM 9-2320-289-34
8-2.
STEERING COLUMN MAINTENANCE (Con’t).
6 .
Lift ignition switch actuating rod and rack assembly (22), lock bolt and spring assembly (23),
and rack preload spring (24) out of directional signal housing (18).
7 .
Remove 2 screws and shift lever detent plate (21) from directional signal housing (18).
8 .
Firmly push on block tooth of sector and remove ignition switch actuator sector through lock
cylinder hole.
9 .
Remove transmission gearshift lever
housing and shroud assembly (25)
from steering column (9). Unwind
transmission gearshift lever spring
(26) and remove.
10.
Pull
end
steering shaft (10) from lower
of steering column (9).
1
1.
Pull tabs on back-up light switch (30) outward and remove from steering column (9).
TA50475
8 -6
