TM 9-2320-289-34
7-3.
POWER BOOSTER REPAIR (Con’t).
8 .
9 .
10.
Install new “O” ring (8) and accumulator (2) in housing (9). Place accumulator retaining ring
(7), accumulator remover, and nut (6) over accumulator.
CAUTION
Ensure that accumulator retaining ring (7) Is completely and properly
installed and accumulator (2) is compressed straight. Failure to follow this
caution may result In damage to accumulator.
Using large “C” clamp (1), depress accumulator (2). Push accumulator retaining ring (7)
completely around into housing (9) groove.
Remove “C” clamp (1) and accumulator remover. Remove power booster (4) from vise.
FOLLOW-ON TASKS:
l Install power booster. (See TM 9-2320-289-20)
TA60385
7-16
