e. INSTALLATION AND PINION DEPTH ADJUSTMENT

6-17. REAR AXLE DRIVE PINION AND BEARINGS MAINTENANCE (ALL EXCEPT M1009) (Cont)

Table 6-4. Determining Drive Pinion Shim Requirements

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
670

TM 9-2320-289-34 6-17. REAR AXLE DRIVE PINION AND BEARINGS MAINTENANCE (ALL EXCEPT M1009) (Con’t). CAUTION Ensure that straddle bearing (16) is installed with part number facing pinion flange. Failure to follow this caution will result in damage to straddle bearing. NOTE If rear axle housing (6) is 1984 or older design, it uses a straddle bearing (16) with rollers that are larger than 1985 design straddle bearing. Ensure that proper size straddle bearing is installed, 9. Install straddle bearing (16) in housing (6). e. INSTALLATION AND PINION DEPTH ADJUSTMENT NOTE If no number is stamped or should be used for code number painted on drive pinion (9), . 1. Check gear head or shaft of drive pinion (9) for pinion depth code number. Remove retainer (1) and drive pinion assembly from vise. TA50603 6-120

Privacy Statement
Press Release
Contact