FOLLOW-ON TASKS - TM-9-2320-289-34

Table 6-4. Determining Drive Pinion Shim Requirements

6-17.1. REAR AXLE DRIVE PINION AND BEARINGS MAINTENANCE (M1028A2)

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
672

TM 9-2320-289-34 6-17. REAR AXLE DRIVE PINION AND BEARINGS MAINTENANCE (ALL EXCEPT M1009) (Con’t). 4 . Ensure that all mating surfaces are clean. Place shim, as determined in INSTALLATION , step 3. onto housing (6), alining all bolt holes. 5 . Install retainer (1) and drive pinion assembly with 6 new Iockwashers and bolts (5). Tighten bolts to 65 Ib.-ft. (88 N.m). FOLLOW-ON TASKS: l Install rear axle differential. (See paragraph 6-15) l Connect rear propeller shaft to pinion flange. (See TM 9-2320-289-20) TA50604 8-122

Privacy Statement
Press Release
Contact