TM 9-2320-289-34
5-22.
TRANSFER CASE MAINTENANCE (M1028A1 AND M1031) (Cont).
30.
31.
Install retainer (29) to transfer case
(1) with new gasket, Apply gasket
sealing compound to 8 bolts (40) and
install.
Tighten bolts to 30 Ib.-ft.
(41 N.m).
Install speedometer drive gear (41)
on rear output shaft (37).
32.
Install snapring (39) to bearing (38).
Install bearing to retainer (29), Install
selective snapring (36) on rear output
shaft (37) groove.
33.
Use feeler gage to measure end play
between selective snapring (36) and
bearing (38) assembly. End play
should
0.002-0.022 in.
(0.05-0.56 mm). If end play is not
within
specifications,
remove
selective snapring and install one of a
different thickness.
TA50356
6-186