TM 9-2320-289-34
5-22.
TRANSFER CASE MAINTENANCE (M1028A1 AND M1031) (Con’t),
3 6 .
3 7.
3 8.
4 0 .
NOTE
If plugs (45) are steel, RTV sealant
should be applied to them before
installing,
Install 2 plugs (45) to top of transfer
case (1). Install ball, spring, new
gasket and poppet plug (46), Install
ball, spring, new gasket, and 4-wheel
drive indicator light switch (17).
If grommet has been removed, heat
new grommet in boiling water to soften
and install to shift link (49).
Install selector rod (2) through
grommet to shift link (49) if removed.
Install shift link to 4-wheel drive shift
rail (44) and range rail (48) with 2
clevis pins (47) and 2 spring clips.
Install front output shaft yoke (50) with
new seal washer, 1 flat washer, and
new locknut (51). Secure yoke in a
suitable holding device and tighten
locknut to 150 Ib.-ft. (203 Nom).
TA701859
5-188
Change 2
