TM 9-2320-289-34
5-22.
TRANSFER CASE MAINTENANCE (M1028A1 AND M1031) (Con’t).
NOTE
Thrust washer (87), front gear (86), and clutch hub (85) must be alined
with bearing bore before installing front output shaft (88) and low gear
(94) assembly.
23.
Install front output shaft (88) and low gear (94) assembly through front gear (86) in transfer
case (1).
24.
Install new bearing (91) to rear retainer (72) if removed. Install rear retainer with new gasket.
Apply gasket sealing compound to 8 bolts (71). Install bolts and tighten to 30 Ib.-ft, (41 N.m).
TA50352
5-182
