TM 9-2320-289-34
5-22.
TRANSFER CASE MAINTENANCE (M1028A1 AND M1031) (Con’t).
CAUTION
Ensure that transfer case (1) is flush against transfer case adapter (10) to
avoid damage to transfer case when tightening bolts (11).
8 .
Position transfer case (1) against transfer case adapter (10) and in line with transmission output
shaft (8). Apply gasket sealing compound to 8 bolts (11). install 6 new Iockwashers (14) and
bolts. Remove 2 guide pins. Install 2 remaining Iockwashers and bolts. Tighten bolts securely.
9 .
Connect selector rod (2) to control lever (4) with 1 new wave washer (7), 1 flat washer (6), and
new cotter pin (5). Install 1 flat washer, new wave washer, and pivot bolt (3). Tighten pivot bolt to
100 Ib.-ft. (136 N.m).
NOTE
2 left transfer case shield bolts (26) are already in place.
10.
Install transfer case shield (23) with 2 right bolts (26), 4 new Iockwashers (25), and nuts (24).
11.
Connect connector to 4-wheel drive indicator light switch (17).
TA50361
Change 2
5-191
