TM 9-2320-289-34
5-22.
TRANSFER CASE MAINTENANCE (M1028A1 AND M1031) (Con’t):
26.
Install thrust washer (59) with tang facing splined end of rear output shaft (37). Install retainer
pin (54) to rear output shaft. Install spacer (55) and index with retainer pin and thrust washer
tang. Install snapring (53) in rear output shaft groove,
27.
Coat pilot bore of rear output shaft (37) with petrolatum and install 15 roller bearings (56),
Install spacer (57) and new retainer ring (58), Ensure that retainer ring is fully seated inside
pilot bore.
TA50354
5-184
