TM 9-2320-289-34
5-22.
TRANSFER CASE MAINTENANCE (M1028A1 AND M1031) (Con’t).
18.
Install new seal (84) to front output
shaft retainer (83) with steel side of
seal to inside.
NOTE
Ensure that notch on inner face of
retainer (83) and gasket are alined
with oil passage in transfer case
(l).
19.
Install front output shaft retainer (83)
with new gasket, Apply gasket sealing
compound to 4 bolts (82). Install
bolts and
tighten
to 35 Ib.-ft.
(47 N.m).
20.
Turn transfer case (1) front side down
and place on wooden blocks.
NOTE
Thrust washer (87) has 4 notches
on outer edge.
21.
Install thrust washer (87) and front
gear (86) inside transfer case (1).
22.
Install clutch hub (85) to front output
shaft shift fork (104).
TA50351
5-181
