TM 9-2320-289-34
5-21.
TRANSFER CASE MAINTENANCE (ALL EXCEPT M1028A1 AND M1031) (Con’t).
3. Remove cotter pin (21) and washer (22), and disconnect control rod (23) at control lever
assembly end. Discard cotter pin.
NOTE
2 left transfer case shield bolts (13) cannot be removed until transfer case
adapter (8) and upper transmission mounts (11) are removed in step 8.
4 .
Remove 4 nuts (18), Iockwashers (17), if installed, 2 right transfer case shield bolts (13), and
transfer case shield (19). Discard Iockwashers.
TA701854
Change 2 5-133
