TM 9-2320-289-34
5-21.
TRANSFER CASE MAINTENANCE (ALL EXCEPT M1028A1 AND M1031) (Con’t).
3. Remove 4-wheel drive indicator light switch (3) and washer.
4. Secure front yoke (32) in a suitable holding device and remove locknut (31), seal washer (30),
and front yoke. Discard locknut and seal washer.
5. Turn transfer case (4) on end and
place on wooden blocks with front
case (29) face down and front output
shaft (33) clear of working surface.
6. Remove detent bolt (36), spring (35),
and poppet (34) from bottom of front
case (29).
TA701855
5-136
Change 2
