TM 9-2320-289-34
5-16.
TRANSMISSION FORWARD CLUTCH ASSEMBLY MAINTENANCE (Con’t),
CAUTION
Ensure that splined surfaces of turbine shaft (3) and forward clutch
assembly (2) are in alinement before assembling them, Failure to follow
this caution may result in damage to turbine shaft and forward clutch
assembly housing.
NOTE
Perform steps 7 and 8 if turbine shaft (3) was removed,
7.
Place forward clutch assembly (2)
housing on arbor press with flat side
up.
8.
Aline shorter splined end of turbine
shaft (3) with splines in forward clutch
assembly (2) housing,
Carefully
press turbine shaft into forward clutch
assembly housing until turbine shaft
bottoms on hub of forward clutch
assembly housing.
NOTE
Forward clutch assembly (2) with aluminum forward clutch piston (16)
does not use apply ring (12).
9.
Compress apply ring (12) and install into recess in forward clutch piston (16) with slots on
edge of apply ring facing outward,
TA50269
5-88
