TM 9-2320-289-34
5-16.
TRANSMISSION FORWARD CLUTCH ASSEMBLY MAINTENANCE (Con’t).
10.
11.
NOTE
Composition-faced clutch plates (14) have teeth along internal
diameter. Fiat steel clutch plates (15) have teeth along external
diameter. Waved steel clutch plate (13) is similar to flat steel clutch
plate, except that it is wavy, -
Composition-faced clutch plates
fluid approximately 15 minutes.
Ensure that a Composition-faced
Installed.
Lubricate all clutch plates with
hydraulic fluid, Install waved clutch
plate (1 3). Alternating flat steel and
composition-faced plates, install 5
composition-faced clutch plates (14)
and 4 fiat steel clutch plates (15),
Place forward clutch assembly (2) in
a soft-jawed vise with turbine shaft
(3) pointing downward. install brass
thrust washer (9) inside of forward
clutch hub (4) facing forward clutch
assembly. install thrust washer (8) on
outside of forward clutch hub and
retain with a light coat of
install forward clutch
forward clutch assembly.
petrolatum.
hub inside
(14) should be soaked in hydraulic
clutch plate (14) is last clutch plate
TA60270
5-89
