5-16. TRANSMISSION FORWARD CLUTCH ASSEMBLY MAINTENANCE (Cont)

c. CLEANING AND INSPECTION - TM-9-2320-289-34_446

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
428

TM 9-2320-289-34 5-16. TRANSMISSION FORWARD CLUTCH ASSEMBLY MAINTENANCE (Con’t). NOTE Composition-faced clutch plates (14) have teeth along internal diameter. Flat steel clutch plates (15) have teeth along external diameter. Waved steel clutch plate (13) is similar to flat steel clutch plate, except that it is wavy. 4 . Remove 5 composition-faced clutch plates (14), 4 flat steel clutch plates (15), 1 waved clutch plate (1 3), and apply ring (12) if present, NOTE Step 5 should not be performed unless either turbine shaft (3) or forward clutch assembly (2) housing is damaged and needs replacement. 5 . With a 3/8 in. drive extension about 3 in. (76 mm) long, press turbine shaft (3) out of forward clutch assembly (2) housing, 5-84

Privacy Statement
Press Release
Contact