TM 9-2320-289-34
5-15.
TRANSMISSION OIL PUMP MAINTENANCE (Con’t).
4. Lightly coat selective washer (14) with petrolatum and install over pump cover delivery sleeve.
Install 2 new oil seal rings (10) on sleeve, ensuring that lap joints are fully seated in grooves.
5. Place pump body (13) on wooden blocks with oil passages facing up.
6. Lubricate pump gears with hydraulic fluid and install pump cover (12) to pump body (13) with
bolt (11), 2 bolts (9), and 2 bolts (7). Leave bolts one turn loose.
NOTE
Perform steps 7-9 to ensure proper alinement of oil pump body (13) and
pump cover (12),
7. Remove forward clutch assembly.
(See paragraph 5-1 6)
8 . P l a c e
oil
pump
assembly (3)
backwards into pump bore of
transmission case and secure with 2
bolts (1). Tighten bolt (11 ), 2 bolts
(9), and 2 bolts (7) to 216 lb.-in.
(24 Nom). Remove 2 bolts (1) and oil
pump assembly from transmission
case.
9. install forward clutch assembly. (see
p a r a g r a p h 5 - 1 6)
TA50260
5-79
