Google+
Facebook
LinkedIn
Twitter
Digg
StumbleUpon
Home
Download PDF
Order CD-ROM
Order in Print
FOLLOW-ON TASKS - TM-9-2320-289-34_442
b. DISASSEMBLY - TM-9-2320-289-34_444
/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
421
422
423
424
425
426
427
428
429
430
431
TM 9-2320-289-34
5-16.
TRANSMISSION FORWARD CLUTCH ASSEMBLY MAINTENANCE.
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning and Inspection
INITIAL SETUP:
Equipment Condition
Materials/Parts
l
Transmission oil pump removed.
l
One forward clutch housing seal
(See paragraph 5-1 5)
l
Two forward clutch piston seals
l
Dry cleaning solvent
(Item 23, Appendix B)
l
Hydraulic fluid (Item 40, Appendix B)
l
Petrolatum (Item 50, Appendix B)
Tools/Test Equipment
General Safety instructions
l
Clutch rebuilder, J-23327
l
Dry cleaning solvent is flammable and
l
Inner seal protector, J-21362
must not be used near open flame.
l
Protector seal, J-21409
Use only in a well-ventilated area.
l
Snapring pliers
l
Compressed air used for cleaning
l
3/8 in. drive extension
purposes should never exceed 30 psi
(207 kPa).
a. REMOVAL
1,
Remove turbine shaft (3) and forward clutch assembly (2) from transmission case.
2.
Remove thrust washer (8)
thrust washer is not found
from direct clutch housing
from forward clutch hub (4) inside forward clutch assembly (2). If
on forward clutch hub, look inside transmission case and remove
(l).
TA50263
5-82
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business