TM 9-2320-289-34
3-38.
FUEL INJECTOR PUMP SHUTOFF SOLENOID AND COLD ADVANCE
SOLENOID REPLACEMENT (Con’t).
NOTE
• Ensure that each component is placed in calibration fluid as it is
removed.
l If removing governor cover (2), perform steps 1-3.
l Ensure that location of washers and Iockwashers is noted for
installation,
l Perform step 1 only if fuel injector pump (4) is in truck.
. Ensure that all leads are tagged for installation.
1.
Disconnect leads from fuel injector pump (4). Disconnect fuel return line from connector (5).
2.
Remove fast idle solenoid (1),
TA50721
3-124
