TM 9-2320-289-34
3-37.
FUEL INJECTOR PUMP AND TIMING COVER REPLACEMENT (Con’t).
4. Connect electrical leads to fuel
injector pump (3).
5. Connect fuel supply line to end cap
assembly (9). Connect fuel return line
to connector (2).
6. Install accelerator cable assembly (1)
to support (6) and throttle shaft pin (4)
with accelerator cable retainer (5),
7. Install timing cover (10) and new
gasket with 2 screws (11).
FOLLOW-ON TASKS:
• Install ransmission vacuum valve if removed. (See TM 9-2320-289-20)
l Install fuel injector pipes. (See paragraph 3-27)
TA50720
3-122
Change 2
