TM 9-2320-289-34
3-37.
FUEL INJECTOR PUMP AND TIMING COVER REPLACEMENT (Con’t).
7. Remove 3 nuts (1 2), fuel injector pump (3), and fuel injector pump gasket (8), Discard fuel
injector pump gasket.
8. Remove 2 screws (1 1), timing cover (10), and gasket. Discard gasket.
b.
INSTALLATION
l If installing
l If installing
NOTE
fuel injector pump (3), perform steps 1-6.
timing cover (10) and gasket, perform step 7.
l Ensure that all protective plugs are removed before connection.
1. Install new fuel injector pump gasket (8) on crankcase cover (7). Aline locating pin (14) with
hole in fuel injector pump driven gear (19) and aline scribe marks on fuel injector pump flange
(13) and crankcase cover. Install 3 nuts (1 2). Tighten nuts to 30 Ib.-ft. (41 N.m).
NOTE
Crankshaft pulley will have to be rotated to install bolts (20) on fuel
injector pump driven gear (19).
2.
Through hole in crankcase cover (7), install 3 bolts (20) on fuel injector pump driven gear
(19). Tighten bolts to 20 Ib.-ft. (27 N.m).
3.
Install grommet (17) on water pump plate (1 6). Install oil filler tube (15) on water pump plate
with 2 nuts (18), Connect crankcase depression regulator valve hose to oil filler tube and
tighten clamp.
TA50719
3-121
