TM 9-2320-289-34
3-38.
FUEL INJECTOR PUMP SHUTOFF SOLENOID AND COLD ADVANCE
SOLENOID REPLACEMENT.
This task covers:
a. Removal
c. Installation
b. Cleaning and Inspection
INITIAL SETUP:
Equipment Condition
Materials/Parts
l Air cleaner removed.
l
(See TM 9-2320-289-20)
l
l
General Safety Instructions
l
• Compressed air used for cleaning purposes
l
should never exceed 30 psi (207 kPa).
l
l Do NOT perform this procedure near fire,
flames, or sparks,
a.
REMOVAL
WARNING
One fuel return line connector seal
One governor cover gasket
Three locknuts
Ten Iockwashers
Calibration fluid (Item 13, Appendix B)
Fuel oil
(Item 25, 26, or 27, Appendix B)
Diesel fuel is flammable. DO NOT perform this procedure near fire,
frames, or sparks. A fire extinguisher must be on hand in work area.
Failure to follow this warning may result in serious injury or death to
personnel.
CAUTION
Ensure that work area, tools, and hands are kept clean when repairing fuel
injector pump. Failure to follow this caution may result in damage to fuel
injector pump components.
3-123
