3-27. FUEL INJECTOR PIPES AND NOZZLES INSTALLATION

3-27. FUEL INJECTOR PIPES AND NOZZLES INSTALLATION (Cont)

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
143

TM 9-2320-289-34 3-27. FUEL INJECTOR PIPES AND NOZZLES INSTALLATION. This task covers: a. Installation INITIAL SETUP: E q u i p m e n t C o n d i t i o n Materials/Parts l Fuel injector pipes and nozzles removed, l Fuel injector nozzle gaskets (See paragraph 3-5) (as needed) Tools/Test Equipment l Crowfoot attachment, J-29698-A • Socket wrench adapter, J-29873 l Torque wrench a . I N S T A L L A T I ON NOTE l Ensure that all plugs are removed before connection, l If installing fuel Injector nozzles (1), perform steps 1, 2, 4, 5, and 7, l If installing fuel injector pipes, perform steps 3-5, and 7. 1. Using socket wrench adapter, install new fuel injector nozzle gaskets (2) and fuel injector nozzles (1) in cylinder heads (3). Tighten fuel injector nozzle to 50 lb. -ft. (68 N.m). 2. Install 2 caps (7) and clamps on rear fuel injector nozzles (1). Connect 8 fuel drainback hoses (6) and clamps to fuel injector nozzles. Install clip (4) with nut (5). TA50691 3 - 85

Privacy Statement
Press Release
Contact