TM 9-2320-289-34
3-27. FUEL INJECTOR PIPES AND NOZZLES INSTALLATION (Con’t).
5. Install 2 fuel injector pipe brackets
(17) on cylinder head studs (18) with
4 nuts (19) if removed. Loosely
connect 8 fuel injector pipes (9) to 8
fuel injector nozzles (1).
6. Install 2 inserts (16) and clips (15) on
fuel injector pipes (9) on one side.
Install clips on fuel injector pipe
bracket (17) with 2 screws (14) on
one side. Repeat step for other side.
N O T E
Perform step 7 if engine is in truck.
7. Crank engine for 10-15 seconds, then wait 1 minute for starter motor to cool. Repeat until fuel
is observed at all fittings. Tighten fittings to 20 lb. -ft. (27 N.m).
FOLLOW-ON TASKS:
l Install intake manifold. (See paragraph 3-28)
TA50693
3 - 8 7
