TM 9-2320-289-20
Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS -
Continued
1.
Fabricate from heater hose, 5/8 in. inside diameter, stock size 25 ft. long,
NSN 4720-00-432-1179.
2.
Cut to 4.25 in. long for Part Number 14033823.
Figure D-11. Thermostat Bypass Hose.
1.
Fabricate from cover, stock size 12.041 in. long, NSN 5490-00-984-9088.
2.
Count off 3 dimplings (1) from end of stock for Part Number MS18029-13L-3.
Using dimpling as a center point, drill 0.64 in. diameter hole through first and
third dimpling. Cut stock 1.062 in. from center of each hole, Total length will be
6.664 in.
3.
Count off 5 dimplings (1) from end of stock for Part Number MS18029-13L-5.
Using dimpling as a center point, drill 0.64 in. diameter hole through first and
fifth dimpling. Cut stock 1.062 in. from center of each hole, Total length will be
9.664 in.
Figure D-12. Cover.
TA49687
D-5
