TM 9-2320-289-20
11-29. FRONT, SIDE, AND WHEEL HOUSE INSULATORS REPLACEMENT (M1008
AND M1008A1) (Con’t).
b.
INSTALLATION
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
NOTE
• If installing front insulator (23), perform steps 1, 2, and 5.
• If installing front side insulators (12), perform steps 3, 4, 6, and 11,
• If installing rear side insulators (13), perform steps 7-9, and 12,
• If Installing wheel house Insulators (21), perform steps 10-13.
Install front insulator (23) flush with front of cargo box.
Install ground wire (3) with screw (8) and new locknut (9) (M1008) or install ground wire (3)
and ground strap (1) on stud (4) with nut (2) (M1008A1). Install wiring harness (5) to front
insulator (23) with 2 bolts (7) and washers (6).
Install front side insulator (12) flush with side of cargo bed.
Install 2 brackets (10) to front side insulator (12) with 4 screws (18).
Install 8 screws (18) on 4 brackets (10) at front insulator (23),
Connect cable at dummy receptacle connector (11) if removed.
Install rear side insulator (13) flush with side of cargo bed.
Install bracket (19) to floor and to rear side insulator (13) with 4 screws (18).
Install rear angle bracket (15) with 2 screws (14) to rear side insulator (13), 2 bolts (16) into
rear endgate post, and 2 bolts (17) into rear door side panel.
Install wheel house insulator (21) over wheel house flush with side and fIoor panels.
Install 2 brackets (20) to front side insulator 12) with 4 screws (18).
Install 2 brackets (20) to rear side insulator (13) with 4 screws (18).
Install 2 brackets (22) to floor with 8 screws (18).
FOLLOW-ON TASKS:
• Install troop seat assembly. (See TM 9-2320-289-10)
• Install communications rack if removed. (See paragraph 4-48)
11-107
