TM 9-2320-289-20
11-30. ROOF COVER AND ENDGATE CURTAIN REPLACEMENT (M1009) (Con’t).
4.
5.
6.
7.
8.
9.
10.
11.
Place roof cover (6), with lettering facing up, over cab and hood, with front fold over edge of
removable cargo cover and centered right-to-left. Line up grommets in roof cover (6) with
existing expansion shield (4) holes.
DO NOT overtighten
shields will break.
CAUTION
screws (2) in expansion shields (4) or expansion
Install 2 top retainers (3) and 2 side retainers (5) with 14 washers (1) and screws (2).
Spread roof cover (6) over rear of truck and smooth it out.
Install bottom edges of roof cover (6) with 12 washers (16) and screws (15).
Install roof cover (6) to rear sides of truck with 4 turnbuttons (12).
Install window flap (7) to 4 turnbuttons (8).
Seal front edge of roof cover (6) with corrosion-resistant sealing compound. Seal top only.
Stop at left and right side drip rails.
Install radio antenna bracket (13) through holes in roof cover (6) with 4 screws (14) if
removed.
11-111
