TM 9-2320-289-2011-28. FLOOR PANEL INSULATORS REPLACEMENT (M1008 AND M1008A1) (Con’t).5.Remove 16 screws (8) and 4 brackets (9) from 2 wheel house insulators (7).6.Remove center insulator (16) from truck.7.Remove 8 screws (11) and 2 brackets (12) holding 2 rear outer insulators (10) to rear sideinsulators. Remove rear outer insulators.b.INSTALLATION• If installing• If installing• If installing• If installingNOTErear outer insulators (10), perform steps 1, 2, and 5.center insulator (16), perform steps 3-5.front insulator (18), perform step 6.front outer insulator (5), perform step 7.1.Place 2 rear outer insulators (10) in rear of cargo bed.2.Install 2 brackets (12) to 2 rear outer insulators (10) and rear side insulators with 8 screws(11).3.Place center insulator (16) in line with 2 mounting holes in floor and install 2 bolts (6), 4washers (13), and 2 new locknuts (14).4.Install 4 brackets (9) to 2 wheel house insulators (7) and center insulator (16) with 16 screws(8) .5.Install rear door frame molding. (See paragraph 11-35)NOTEThere will be no front insulator (18) or front outer insulator (5) if truck isequipped with communications rack.6.Install front insulator (18) with 3 bolts (1), 6 washers (2), and 3 new locknuts (17).7.Install front outer insulator (5) with 2 bolts (3), 4 washers (4), and 2 new locknuts (15).11-103
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
