TM 9-2320-289-20
11-27. CARGO COVER INSULATOR REPLACEMENT (M1008 AND M1008A1) (Con’t).
11.
Remove 18 screws (7) and nuts (12) from cargo cover insulator window assembly.
12.
Remove retainer (8) and plastic window (9).
13.
Remove gasket (10) and retainer (11) from opening.
b.
INSTALLATION
1.
2.
3.
4.
5.
6.
7.
8.
Remove protective paper from plastic window (9).
Apply RTV sealant to mating surfaces. Install retainer (11) and gasket (10) to plastic window
(9) .
Install retainer (11), gasket (10), and plastic window (9) to opening in cargo cover insulator.
Apply RTV sealant to mating surfaces. Install retainer (8) and secure through all layers with 18
screws (7) and nuts (12).
Place folded cover insulator (15) over front roof bow.
If installing new cover insulator (15), remove window protective paper.
Spread cover insulator (15) over roof, alining front hole with air inlet adapter and right rear hole
with air exhaust adapter.
On inside of cargo compartment, install cover insulator (15) to turnbuttons at front rail
assembly.
TA50121
11-98
