TM 9-2320-289-20
11-27. CARGO COVER INSULATOR REPLACEMENT (M1008 AND M1008A1) (Con’t).
9.
If removed, install tube anchor nuts (23). Aline grommets on both sides of cover insulator (15)
with tube anchor nuts, Partially install 32 washers (22) and screws (21).
10.
On inside of cargo compartment, install retaining strap around air inlet duct.
11.
Aline grommets on back of cover insulator (15) with rear door opening panels.
12.
Partially install 8 screws (18), washers (17), and nuts (16) at top and bottom of rear door
opening panels.
13.
If removed, install tube anchor nuts (19). Partially install 12 screws (20) down sides of rear
door opening panels.
TA50122
11-99
