TM 9-2320-289-20
11-5.
ENGINE COMPARTMENT AND CAB INSULATOR REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools/Test Equipment
• Torque wrench
a.
REMOVAL
NOTE
• If removing hood or radiator insulators (3 or 8), perform steps 1 or 2.
• If removing cab floor insulators, perform steps 3-6.
1.
Pry 24 retainers (2) from hood inner panel (4). Remove hood
insulator (3) from hood (1).
2.
From underneath bumper, disconnect and remove 3 springs (5) from insulator loops (7) and
radiator support (6). Remove 2 turnbutton studs (9), Unsnap radiator insulator (8) from top of
grille, and remove.
TA50042
11-12
