TM 9-2320-289-20
11-5.
ENGINE COMPARTMENT AND CAB INSULATOR REPLACEMENT (Con’t).
2.
NOTE
M1009 sill plates (15) are flat and use
screws (13).
Install 2 sill plates (15) with 6 screws
(13).
3.
4.
5.
6 vertically-installed mounting
Install chemical agent alarm bracket
(10) with 4 bolts (11). Tighten bolts to
35-55 lb.-in.
(4-6 N•m). Install
chemical agent alarm unit.
install transfer case bezel and boot
(see paragraph 5-4) or transfer case
plate and boot (see paragraph 5-3).
Install front seats and seatbelt floor
mounting. (See paragraph 10-18,
10-23, or 10-25) Install jack, handle,
and wheel wrench if removed.
Snap radiator insulator (8) to top of grille. Install 2 turnbutton studs (9). From underneath
bumper, connect 3 springs (5) to insulator loops (7) and radiator support (6).
TA50045
11-15
