b. INSTALLATION - TM-9-2320-289-20

11-5. ENGINE COMPARTMENT AND CAB INSULATOR REPLACEMENT (Cont) - TM-9-2320-289-20_643

11-5. ENGINE COMPARTMENT AND CAB INSULATOR REPLACEMENT (Cont) - TM-9-2320-289-20_645

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
623

TM 9-2320-289-20 11-5. ENGINE COMPARTMENT AND CAB INSULATOR REPLACEMENT (Con’t). NOTE M1009 sill plates (15) are fiat and use screws (13). 5. Remove 6 screws (13) and 2 sill plates (15). 6 vertically-removed mounting 6. Pry 2 retainers (12) from bulkhead (16). Remove floor mat (14). Remove front cab floor insulator (18) and rear cab floor insulator (17). b. INSTALLATION • If installing • If installing NOTE radiator or hood insulators, perform steps 5 or 6. cab floor insulators (17 or 18), perform steps 1-4. • Ensure that holes in insulators aline with holes in cab floor. 1. Install rear cab floor insulator (17) and front cab floor insulator (18). Install floor mat (14) on bulkhead (16) with 2 retainers (12). TA50044 11-14

Privacy Statement
Press Release
Contact