TM 9-2320-289-20
10-33. AIR CONDITIONER COVER AND CONDENSER ASSEMBLY REPLACEMENT
(M1010).
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
. Both battery negative cables disconnected. (See paragraph 4-38)
a.
REMOVAL
NOTE
If removing capacitor (7), perform steps 1-5.
1.
Remove 20 screws (3).
2.
Raise cover assembly (1) and disconnect 2 wires (8) at 2 condenser motors (11) and ground
wire at left condenser motor. Remove cover assembly.
TA50025
10-122
