10-26. REAR DOOR ASSEMBLY, HINGES, AND LOCK MECHANISM REPLACEMENT (M1010) (Cont)

10-26. REAR DOOR ASSEMBLY, HINGES, AND LOCK MECHANISM REPLACEMENT (M1010) (Cont) - TM-9-2320-289-20_596

10-27. REAR DOOR ASSEMBLY FIXED GLASS REPLACEMENT (M1010)

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
576

TM 9-2320-289-20 10-26. REAR DOOR ASSEMBLY, HINGES, AND LOCK MECHANISM REPLACEMENT (M1010) (Con’t). 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. NOTE Left rear door assembly has no handle bracket (9). Position handle bracket (9) behind lock mechanism (11) and new locknuts (10). Install outside handle (8) with 4 screws. Tighten 2 bolts (12) and bolts (15). Install access panel (18) with 10 screws (17). Install right inside handle (14) with setscrew (13). Install left inside handle with 2 screws. NOTE Door-mounted portion of 3 hinges (5) has 6 slotted adjustment and proper fit. Install 3 hinges (5) to truck with 6 bolts (2) and washers (54 N•m). loosely install 2 bolts (15) and holes to allow for (1). Tighten bolts to 40 Ib.-ft. While supporting door assembly (6), install 3 hinges (5) to door assembly with 6 bolts (3) and washers (4). DO NOT fully tighten bolts. Close 2 door assemblies (6) and check for proper fit. Adjust as required at 3 hinges (5). Tighten 6 bolts (3) to 40 Ib.-ft. (54 N•m). 10-101

Privacy Statement
Press Release
Contact