TM 9-2320-289-20
10-22. ENDGATE WINDOW AND WINDOW REGULATOR REPLACEMENT (M1009)
(Con’t).
b . I N S T A L L A T I O N
NOTE
If installing handle assembly (28), perform steps 1-3, and 9 as
required.
If installing window regulator (12), perform steps 4, 5, and 7 through 9.
If installing window (17), perform steps 4 and 6 through 9.
If installing access cover, perform step 9.
1.
Install lock unit (18) on base (19) with spring (31) and pawl (32). Install spring washer (22) and
retainer (23). Install clutch (24) with clip (25).
2.
Install pin (30) on arm of base (19). Position arm of handle assembly (28) on base and install 2
screws (29), Install gasket (20) and bezel (26) on base.
3.
Install base (19) and handle assembly (28) on endgate (1) with 2 nuts (27).
4.
Install window regulator (12) in endgate (1) with 4 screws (11).
TA49996
10-81
