TM 9-2320-289-20
10-23. DRIVER’S, PASSENGER’S, REAR BENCH SEAT, AND SEATBELT
REPLACEMENT (M1009).
This task covers:
a.
Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Materials/Parts
• Radio mounting bracket removed (if removing
• TWO Iockwashers
rear bench seat). (See paragraph 4-47)
Tools/Test Equipment
• Torque
wrench
• Screwdriver bit set, J-29843
a.
REMOVAL
NOTE
If removing seatbelts (1 and 2), perform step 1.
If removing seats (9) and seat adjuster assemblies (4 or 8), perform
steps 2-4.
If removing rear bench seatbelts, perform step 5.
If removing rear bench seat, perform step 6.
1.
Remove plug from retractor cover
(3). Pry back seatbelt (2) covers to
expose mounting bolts at door pillar
and floor. Remove 3 mounting bolts
and seatbelt. Remove seatbelt buckle
( 1 ) m o u n t i n g b o l t p l u g . R e m o ve
mounting bolt and seatbelt buckle.
2.
Remove 2 forward bolts (7), Adjust
seat (9) forward and remove 2 rear
bolts (11) at adjuster bracket (13).
R e m o v e s e a t a n d s e a t a d j u s t er
assembly.
TA49999
10-84
