TM 9-2320-289-20
10-21. ENDGATE MAINTENANCE (M1009) (Con’t).
6.
Position 2 torque rod brackets (7) in endgate (8). Position 2 torque rods (1) with silencers (2
and 6) in endgate. Install 4 bolts (5). Position 2 brackets (3), ensure that they cover silencers
(2), and install with 4 bolts (4).
7.
Install hinge assembly (18) with 4 bolts (17).
8.
Install washer (21), support (15), spring (22), and washer (23) with bolt (24).
9.
Twist run channel (25) into window opening and position in endgate (8). Install 2 screws (20).
d.
INSTALLATION
CAUTION
Carefully guide in torque rods (1) when installing endgate
follow this caution may result in damage to torque rods.
1.
Install 2 hinge assemblies (18) on floor panel with 8 bolts (19).
(8). Failure to
2.
Connect 2 washers (13), spacers (14), and supports (15) with 2 bolts (16).
3.
Position torque rods (1), and install each on frame extension (10) with stud (9), new
Iockwasher (11), and nut (12). Tighten nuts to 45-60 Ib.-ft. (61-81 N•m).
TA49991
10-76
