10-22. ENDGATE WINDOW AND WINDOW REGULATOR REPLACEMENT (M1009) (Cont)

b . I N S T A L L A T I O N - TM-9-2320-289-20_576

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
556

TM 9-2320-289-20 10-22. ENDGATE WINDOW AND WINDOW REGULATOR REPLACEMENT (M1009) (Con’t). 5. Install sash channels (13) on window regulator (12) arms if removed. Regulate window (17) until sash channels and screws (14) can be installed. 6. Install new filler (16) on window (17) if removed. Apply a ½ in. wide strip of red tape along top edge of rear tailgate window. Press filler and window assembly into sash (15) . Position sash, filler, and window assembly in endgate (1). 7. Install sash channels (13) on sash (15) with 4 screws (14). TA49997 10-82 Change 2

Privacy Statement
Press Release
Contact