TM 9-2320-289-20
10-21. ENDGATE MAINTENANCE (M1009) (Con’t).
7.
Remove clip (42) and disconnect handle rod (43) from handle (40). Remove 2 screws (41)
and handle.
8.
Remove 3 screws (39) and control assembly (28). Disconnect handle rod (43) from control
assembly.
NOTE
Stop (34) is factory-installed with flanged nut and washer instead of nut
(36) and Iockwasher (35). Use nut and Iockwasher for installation.
9.
Remove spring (38). Remove 2 screws (33) and lockout rod (32). Remove nut (36),
Iockwasher (35), bolt (37), and stop (34). Discard Iockwasher.
TA49989
10-74
