TM 9-2320-289-20
10-16. ENDGATE REPLACEMENT (M1008 AND M1008A1) (Con’t).
b.
INSTALLATION
NOTE
• If
installing
• If
installing
• If
installing
steps 1-8.
plates (1), perform steps 10 and 14.
endgate (10), perform steps 13 and 14.
latch assemblies (9) and handle assembly (13), perform
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Install 2 insulators (8)
Install right rod (7) to
to rods (7).
right latch assembly (9).
Install right latch assembly (9) and attached right rod (7) with 2 bolts (14).
Install left rod (7) to handle assembly (13) at clip (12).
Install left rod (7) and handle assembly (13) through handle assembly hole in endgate (10).
Position left latch assembly (9) and connect to left rod (7). Install left latch assembly with 2
bolts (14) .
Connect right rod (7) to handle assembly (13) at clip (12).
Install handle assembly (13) with 3 bolts (6).
Install 4 bumpers (3 and 5) with 4 screws (4).
Install 2 plates (1) with 4 bolts (2).
Install 2 trunnions (16) with 4 bolts (17).
Install 2 bushings (11) with 4 bolts (15).
Position left bushing (11) onto left trunnion (16) and right bushing (11) onto right trunnion (16).
Raise endgate (10) partway and install 2 plates (1) at latch assemblies (9).
10-50
