TM 9-2320-289-20
10-14. HEATER CONTROL REPLACEMENT.
This task covers:
a.
Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Instrument cluster plate removed. (See paragraph 4-7)
a . R E M O V A L
1.
Remove 4 screws (7) and pull out heater control assembly (6).
2.
Remove nut
control base
arm (8) and
(4) and disconnect defroster cable (3) from upper control arm (5) and heater
(2). Remove nut (10) and disconnect temperature cable (9) from lower control
heater control base.
TA49965
10-44