10-17. SHELTER TIE-DOWN REPLACEMENT (M1028)

10-16. ENDGATE REPLACEMENT (M1008 AND M1008A1) (Cont) - TM-9-2320-289-20_544

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
524

TM 9-2320-289-20 10-17. SHELTER TIE-DOWN REPLACEMENT (M1028). This task covers: a. Removal b. Installation INITIAL SETUP: Too/s/Test Equipment • Torque wrench a. REMOVAL • Left NOTE and right shelter tie-downs are removed the same way. • If removing rear shelter tie-downs, perform steps 1-4. • If removing front shelter tie-downs, perform step 5. • Nut (13) is tack welded. Remove nut only if threads appear damaged. 1. Remove nut (2) and bolt (7) securing brace (3), bracket (5), and support (6). Remove bolt (1) and brace. NOTE Hold bolt (4) while loosening nut (10) to keep bolt from turning. 2. While supporting reinforcement (8), remove 2 nuts (9), nut (10), and reinforcement. 3. Remove bolt (4), bracket (5), and support (6). 4. R e m o v e p a d ( 1 4 ) a n d s a v e f o r installation. Remove spacer (11) from rear stake pocket (12). NOTE Hold bolt (15) while loosening nut (19) to keep bolt from turning. 5. Remove nut (19), bolt (15), and reinforcement (20) from both front stake pockets (12). Remove front bracket (16) and 2 pads (17). Remove spacer (18) from each stake pocket. TA49969 10-52

Privacy Statement
Press Release
Contact