TM 9-2320-289-20
10-13. HEATER ASSEMBLY, HEATER CORE, AND HEATER HOSES REPLACEMENT
(Con’t).
b.
INSTALLATION
• If
• If
1.
NOTE
installing heater core (28), perform steps 1-7, and 9.
installing heater hoses, perform steps 8-10.
Install heater core (28) on heater
assembly (16) with clamps (29 and
31) and 4 screws (30).
NOTE
Ensure that control cables are not
behind heater assembly (16) when
installing heater assembly.
2.
Position new heater core seal (26)
with holes over heater core tubes.
Position heater assembly (16) with
studs and heater core tubes through
bulkhead. Install screw (27).
10-40
