b . I N S T A L L A T I O N - TM-9-2320-289-20

10-4. HOOD, HINGE, AND LATCH REPLACEMENT (Cont)

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
481

TM 9-2320-289-20 10-4. HOOD, HINGE, AND LATCH REPLACEMENT (Con’t). b . I N S T A L L A T I O N NOTE • If installing primary latch (2), perform steps 5-7, • If installing hinge (11) or hinge spring (14), perform steps 1, 2, and 4, as required. • If installing hood (8), perform steps 3 and 4. 1. Install hinge spring (14) on fender (12) with 2 bolts (13). 2. Install hinge (11) with 2 bolts (10). DO NOT fully tighten bolts. 3. Install spring (16) if removed. Install secondary latch (17) with 2 bolts (18) if removed. 4. Install hood seal (15) on hood (8) if removed. Install hood with 4 bolts (9) on each side of hood. 5. Install support (1) with 2 bolts (3) if removed. 6. Install primary latch (2) with 2 bolts (7). DO NOT fully tighten bolts. 7. Install hood latch cable (5) on cable clip (4) and grommet (6) on primary latch (2). TA49934 10-8

Privacy Statement
Press Release
Contact