TM 9-2320-289-20
9-5.
PINTLE ASSEMBLY REPLACEMENT (M1009) (Con’t).
b. INSTALLATION
1.
2.
3.
4.
5.
6.
NOTE
During installation check that pintle hook (10) swivels freely.
Install bracket (8) and spacer (7) to pintle hook (10) and install pintle hook
bracket (11).
Install spacer (7) and bracket (1) with grease fitting toward bottom.
through tow hook
Install 4 bolts (9), new Iockwashers (6), and nuts (5). Tighten nuts to 70-80 lb.-ft.
(95-108 N•m).
Install washer (2) and nut (3).
Loosen nut (3) until it alines with hole in pintle hook (10). Install new cotter pin (4).
Lubricate pintle assembly. (See LO 9-2320-289-12)
9-9
