TM 9-2320-289-20
9-4.
PINTLE ASSEMBLY REPLACEMENT (ALL EXCEPT M1009 AND M1010) (Con’t).
b.
INSTALLATION
NOTE
During installation, check that pintle hook (10) swivels freely.
1.
Assemble bracket (8) and pintle hook (10) with flat side of bracket facing reinforcement (7).
2.
Install pintle hook (10) and bracket (8).
3.
Install bracket (1) with grease fitting toward bottom.
4.
Install 4 bolts (9), new Iockwashers (6), and nuts (5), Tighten nuts to 70-80 Ib.-ft.
(95-108 N•m).
5.
Install washer (2) and nut (3).
6.
Loosen nut (3) until it alines with hole in pintle hook (10). Install new cotter pin (4).
7.
Lubricate pintle
FOLLOW-ON TASKS:
• Install spare tire.
assembly. (See LO 9-2320-289-12)
(See paragraph 9-10)
9-7
